Clean Sweep Submarines

WIP 3: The stern master

It has been a while but I spent my time well. The rough stern master is finished, in the picture below I have indicated all the parts of the stern assembly.

VICTOR III stern assembly parts

The towed Array Pod is provided with hatch openings

VICTOR III towed array pod hatches

Picture below, all the leading edges of the control surfaces of the rudders and planes are provided with a radius. The clearance between the control surfaces and the body is 0.5 mmm.

VICTOR III diving plane clearance

All the different parts were test fitted without remark.

VICTOR III fitting test towed array pod VICTOR III fitting test towed array pod VICTOR III fitting test stern parts VICTOR III fitting test stern parts

Thks & Grtz,
Bart

Practical wisdom is the school of experience [Samuel Smiles]